<menu id="gkguy"><strong id="gkguy"></strong></menu>
<menu id="gkguy"><tt id="gkguy"></tt></menu>
  • 相關雜志相關協會相關書籍
    熱門關鍵詞:干燥設備  閃蒸干燥機  噴霧干燥機  污泥干燥機  振動流化床  帶式干燥機  槳葉干燥機  填料  盤式干燥機  振動篩  離心泵  分散機
    您現在的位置:首頁 >> 泵閥設備 >> 雜質泵

    進口液下渣漿泵(歐美進口十大品牌)

    產品關鍵詞:進口液下渣漿泵 進口液下渣漿泵 進口液下渣漿泵 進口液下渣漿泵
    • 產品名稱:進口液下渣漿泵(歐美進口十大品牌)
    • 產品編號:
    • 產品商標:GRIMM
    • 產品規格:空
    • 參考價格:面議
    • 更新時間:2020/1/2 11:54:08
    • 點擊次數:386次

    英國GRIMM格林進口液下渣漿泵 UK GRIMM Imported liquid slurry pump

    進口液下渣漿泵.jpg

    英國GRIMM格林進口液下渣漿泵概述:    

     

              進口液下渣漿泵,浸入液下,是英國格林開發研制的新一代高效耐磨節能型立式渣漿泵,該系列采用國際上先進的固液兩相流理論,按zui小損失原則設計,其過流部件的幾何形狀符合介質的流動狀態,減少了渦流和撞擊待局部與沿程水力損失,從而減輕了過流部件的磨損,搞高了水力效率,降低了運行噪音和振動,該系列泵過流部件采用高硬質高鉻合金材質,其材質具有高抗磨、抗腐蝕性、搞沖擊性性能,從而使其壽命提高。

              進口液下渣漿泵是立式單級單吸懸臂式離心泵結構,葉輪為半開式葉輪,在葉輪吸入邊延伸處設有攪拌葉片。
              該泵主要用于環保、市政工程、火力發電廠、加氣混凝土、煤氣焦化廠、煉油廠、煉鋼廠、采礦、造紙業、水泥廠、食品廠、印染等行業抽吸濃液、稠油、油渣、污濁液、泥漿、灰漿、流砂及城市排污溝道的流動污泥,以及含有泥砂渣物流體和有腐蝕性液體。GRYW型還可抽吸各種人畜糞便污水和大中沼氣池,沼氣工程時出料使用。GRYZ(S)型還可輸送高溫(500℃)的煤油、原油、瀝青、油渣等工況。

    英國GRIMM格林進口液下渣漿泵結構說明:
             進口液下渣漿泵為單級,單吸懸臂式結構,用軸承座,支承座,聯接管連接泵的水力部件,液體由出液管部件排出,泵的葉輪為半開式葉輪,在葉輪葉片進口延伸處設有攪拌葉片,該泵主要特點是在液下部件的泵軸,有足夠的剛度,葉輪,泵殼之間不設軸承,不采用軸封,可以輸送含有較大濃度固體顆粒的介質。泵插入液下的長度在800-2000之間,如果需要可以配帶吸入管。軸封采用液下泵插入液體中運行,不設軸封,傳動由立式電動機安裝在電機支承座上,用聯軸器與泵相連。

    英國GRIMM格林進口液下渣漿泵技術參數 

     

    流量:12-413m3/h
    揚程:4-60m
    口徑:50-200mm
    轉速:730-1480r/min
    功率:1.1-90kw
    電壓:380V

    英國GRIMM格林進口液下渣漿泵適用范圍: 
              該泵主要用于環保、市政工程、火力發電廠、加氣混凝土、煤氣焦化廠、煉油廠、煉鋼廠、采礦、造紙業、水泥廠、食品廠、印染等行業抽吸濃液、稠油、油渣、污濁液、泥漿、灰漿、流砂及城市排污溝道的流動污泥,以及含有泥砂渣物流體和有腐蝕性液體。

    UK GRIMM Imported liquid slurry pump summary:

               The import of slurry, liquid, is a new generation of high wear-resistant energy saving vertical slurry pump developed by the British Green, the series uses the international advanced solid-liquid two-phase flow theory, designed according to the principle of minimal loss, its flow components conform to the geometry of the flow medium, reduces the eddy current and the impact to the local along with the hydraulic loss, thereby reducing the abrasion of flow components, high hydraulic efficiency, reduce operation noise and vibration, the series of pump flow components of high rigid high chromium alloy material, the material has high abrasion resistance, corrosion resistance, impact performance, so as to improve its life.

            The inlet liquid slurry pump is a vertical single stage single suction cantilever centrifugal pump structure. The impeller is a semi open impeller, and a stirring blade is arranged at the extending direction of the suction side of the impeller.

            The pump is mainly used for environmental protection, municipal engineering, power plant, aerated concrete, gas coking plants, oil refineries, steel mills, mining, paper, cement factory, food factory, printing and dyeing industry, heavy oil, diesel oil, liquid suction dirty liquid, slurry, mortar, sewage flow channel sand and the flow of the city sludge and sand containing residue fluid and corrosive liquids. GRYW can also suck various kinds of human and livestock excrement, sewage and large and medium methane tank. GRYZ (S) type can also carry high temperature (500 DEG C) of kerosene, crude oil, asphalt, oil and other conditions.

     

    UK GRIMM Imported liquid slurry pump structure deion:

     

     

     

     

     

     

               The import of slurry for single-stage, single suction cantilever structure, bearing seat, bearing seat, the connecting pipe hydraulic components connected with the pump, the liquid from the liquid outlet pipe parts discharge pump impeller for semi open impeller with stirring blades in the impeller blade inlet extension, the pump is the main characteristics of pump shaft parts the liquid, with enough rigidity, impeller, pump shell bearing set between the seal, can be transported with high concentration of solid particles of the medium. The length of the pump is between 800-2000. If necessary, the suction pipe can be provided. The shaft seal adopts the liquid pump to insert into the liquid and runs without the shaft seal. The transmission is installed on the motor support seat by the vertical motor and connected with the pump by the coupling.

    UK GRIMM Imported liquid slurry pump technical parameters:

     

     

     

     

     

     

     

     

     

     

     

    Flow rate: 12-413m3/h

    Lift: 4-60m

    Caliber: 50-200mm

    Speed: 730-1480r/min

    Power: 1.1-90kw

    Voltage: 380V

    UK GRIMM Imported liquid slurry pump scope of application:

     

               The pump is mainly used for environmental protection, municipal engineering, power plant, aerated concrete, gas coking plants, oil refineries, steel mills, mining, paper, cement factory, food factory, printing and dyeing industry, heavy oil, diesel oil, liquid suction dirty liquid, slurry, mortar, sewage flow channel sand and the flow of the city sludge and sand containing residue fluid and corrosive liquids.

    *主 題:
    *公司名稱:
    *聯 系 人:
     電 話: 兩種聯系方式
    必須填寫一個
     電子郵件:
    *反饋內容:
    *驗 證 碼: 點擊刷新驗證碼
    免責聲明:以上信息由企業自行提供,該企業負責信息內容的真實性、準確性和合法性;C械網對此不承擔任何保證責任。
    關于我們 - 聯系我們 - 本站公告 - 服務條款 - 網站幫助 - 商務服務 - 法律聲明 - 法律顧問 - 友情鏈接 - 在線咨詢 - 網站地圖
    全國客服熱線:400-667-8871
    Copyright © 2004-2013 中國化工機械網 www.pariscine.com 江蘇東網信息科技有限公司 版權所有
    • 廣告業務(圖片廣告、會員申請):400-667-8871
    • 設備采購(設備采購、導購咨詢):400-667-8871
    • 信息編輯(會員審核、信息發布):400-667-8871
    • 媒體合作( 展會、協會、雜志 ):400-667-8871
    • 人力資源:400-667-8871
    • 圖文傳真:0519-89897519
    蘇ICP備05005804號 增值電信業務經營許可證 蘇B2-20110228 E-mail:
    http://www.pariscine.com/Sample/Pro3482483.html
    一二三区日本免费高清